Love Model 3 WE BEAT PRICES

Love Model 3 with GLass Container 3 1/2 hour [100 LOVE 3]

$199.00

Love Model 3 with GLass Container 3 1/2 hour

Introducing the LOVE Model 3
1 Gallon in 3 1/2 hours
(1/2 time as some)GLASS not Plastic Container!

Beware! Other "glass" containers actually have a plastic top upper half, (ours has a glass top AND glass lid) and the hot water coming into the containers evaporate and condenses on the top of these 1/2 glass containers, and drips back down into the container contaminating the water from the plastic.

We are the only company who's entire container is ALL GLASS! Also of note,

the other cheap glass containers that are just modified coffee

pitchers, the plastic in the upper part of these is not labeled, and

the type of plastic is unknown. The other option

is to leave the cheap plastic lid off, which exposes all your water

to dust or bugs. We have the ONLY all GLASS sealed container,

not some cheap coffee maker converted pitcher. Some may look

prettier, outs is functionally better and SAFER! No Plastic inside

the glass container!

QUESTIONS? CALL 740 544 5842

Some of the improvements we have made are:

ILLUMINATED status light - Almost unheard of on a distiller this size! - Tells you when its making pure distilled water!

STAINLESS STEEL SPLASH OVER DOME PROTECTION: This is simply a piece of stainless steel that blocks splattering of contaminated water from getting directly into the distillation coil , which leads to a higher quality of distilled water. Although its nothing super sophisticated, it does dramatically increase the quality of the distilled water produced. You can slide it in and out of place, to test just how much of a difference it makes during distillation! While covered up, as in the right hand side, this protects splattering of the bad stuff up into the distillation coil, and only allows PURE DISTILLED STEAM to force its way up into the distillation coil! Keeping the yucky stuff in the boiling chamber from splattering up into the coil goes a long ways to producing the best distilled water. NOTICE! On upcoming production runs, a new improved splashguard design will be inside the coil of the distiller , and not able to be seen , or turned off.

Top of Distiller (DOME)

Shown is the All Stainless Steel Dome with the (C)Splash Protector (internal and not able to be seen on new production runs of distiller.)

Glass container: The water entering the glass container is 102-105F. After years of people requesting a small economical unit, with a glass container, we now have it! This eliminates the fear of your water going into plastic at 105F, and no longer will you have to wait for the new taste to go away from the plastic container that comes with most distillers. These glass receptacles are made by hand.

Other improvements are:
A little better style connector between the container and the distiller.

This helps prevent airlocks from occurring, reducing the chance of spill overs.

A little better style filter

This reduces the chance of bacteria growth
And has a better filtering quality, making sure a greater percentage of the coconut charcoal comes into contact, filtering the
water better. Other styles may allow the water to flow around the filter media, instead of through it! The only other distiller on the market with a glass receptacle has the water flowing through a paper style filter before going into the glass receptacle. This one does not, it flows through this filter, that does not have paper, into a glass container. These filters tend to last 2 to 3X longer than paper filters

Stainless Steel in the interior where your water touches, composite material on the outside to prevent rust!

Mthe fan housing exterior is made of a composite material ( non metal ) like most distillers
Nthe exterior is made of a composite material. Others are made of TIN that rust and dent easily
O The Bottom Plate is made of a composite material, not metal. This is a place that rusts a lot on units who's exterior is made out of tin, because condensation from the unit tends to collect on the bottom rusting many units out after a period of time that are tin exterior.

A little bit better reset switch and receptacle

This unit has a little bit better quality stainless finish in the inside of the boiling chamber.

Probably the most common thing to break on most distillers is an internal fuse, that is not easy for the customer to replace. 90% of the small counter top distillers that quit working, do so because of this blown fuse that is hard to change. These are not normal fuses, they are thermal fuses designed to blow at a certain temperature. In our goal of eternal perfection, we have replaced the fuse, with a heat sensitive circuit breaker! So, should the unit overheat, it will shut off, preventing damage, and then after it cools down, it will reset the circuit breaker automatically! No expensive hard to replace fuse! Yet still having a safety device should the main reset button break! A few years ago, the manufacture of these thermal fuses sent out a batch that was bad, and 25 percent of the counter top distillers would fail out of the box within 3 months. This was a problem that stretched across brands. In fact, many of these distillers with the bad fuses are still being sold on Ebay today. And even if you have a good fuse, all it takes is to make one batch of water without letting the typical distiller cool down enough, and the fuse can blow! Well.. the new Model III does not have any fuses ( many times designated by the phrase 'melting point') And as stated before, this is the weakest point on most distillers (thermal fuse) and we have eliminated that problem with a circuit breaker that resets itself! Just so others don't confuse you, most distillers have 1 circuit breaker and one fuse. Our new unit has two circuit breakers, totally eliminating the need for the troublesome fuse.

BELOW , new style maintance free Circuit Breaker vs Old Thermal Fuse setup. Model III, only model like it with the new Circuit Breaker!

One dealers sends 3 fuses with his new units because he has so much trouble with the fuses!

Test Results:
I ran one batch of water through the distiller, and threw that batch away. After that, I cleaned the new glass container out with dishwashing soap, and then rinsed that out to make sure I got all the soap out! After that I made a new batch of water, and the water tasted fine!

The reason I mention the above is.. a lot of distillers will produce either a plastic taste, or a metallic taste when they make water because of the stainless steel they use, or the incol-aloy heating element some distillers use. This one does not! Companies (usually the ones that want to sell you a $1000 distiller) will tell you to Chill the water, or put drops of lemon juice in it, HAHAHA to cover up the taste from their inferior materials they use being leached into the water. Well folks, this produces clean tasting water, no need to put something else in the water to COVER UP any bad tastes or smells! And did I also forget to mention... No funny smell from a plastic bottle that your water is going into? :)

CONDITION :   BRAND NEW
Capacity           Up To 1 Gallon in 3 1/2 to 4 hours!
Voltage:            120V
Wattage:           895 Watts
300 More Watts of quick distillation power than our other models!
Amp       :           7.43@120.5V
PF          :           1
Fan Noise:       At 2 feet away 58dB A, meter set to slow response. Which is about 2dB quieter than our other model. Fan sound
also is of a lower frequency, thus many will find this more ear pleasing than other models.

Comes with :

120V Distiller

2 filters ( each lasts up to 3 months)

Bottle of cleaner!

Power Cord

GLASS CONTAINER
All in a brand new fresh unopened package!

The Choice is clear 16 out of 17 areas shows the LOVE Model 3 to be superior. Read Below.
(And we could list a lot more )

	Older Model Distillers	Our new Model 3 Love Distiller
Distillation time	Aprox 5+ hours	as quick as 3 Hours
Filter	Paper style	Improved Filter - non paper
Filter Life	About 1 month	Up to 3 Months
Boiling chamber finish	Average	Higher quality polish to metal
Glass Container	No	Yes
Watts ( higher wattage - hotter boiling, kills more germs	aprox 590 watts	895 Watts of Steam Pure Power
Illuminated Light to tell when unit is making pure distilled water.	No	Yes
Noise		almost 2dB quieter than earlier models
Outer exterior	Tin	High Strength ABS dent resistant Composite No Rust - less chance of denting
Inside of Boiling chamber	Stainless Steel	Stainless Steel
Splash Over Protector	No	Yes - new design will have it built into coil, non visable
Rust Proof Exterior?	No - Made of tin.	Yes
Water Container Jug material Certication	no certification stamp on plastic jug	GLASS !
New Style Circuit Breaker Protection	No must be sent in for repair if overheats	Yes- Auto Resets!
Water Jug	Plastic	Non Leaching GLASS !
Seal-less Coil into dome	Has Seal - can wear	Seal-less tight fit - no seal to wear ! No Plastic!
Filter Weight	2/10ths of an ounce in weight	1.4 Ounces in weight ! 7X Heavier !

Specifications are aprox. Distillation rates/times are aproximate and can vary.

Our advertising is designed for the experienced distiller user. It is this group that likes our products best, because of the practical improvements they have been asking for over other comparable distillers.

Available Options:

This product was added to our catalog on Friday 29 September, 2006.

Quantity:

Customers who bought this product also purchased

Water Distiller Cleaner